MILLIPORE SDI TESTER CON PAQ. FILTROS

ARTÍCULO OBSOLETO

MILLIPORE SDI TESTER CON PAQ. FILTROS
Ref. producto: 2195900

ARTÍCULO OBSOLETO

Este artículo ya no está disponible.

The Silt Density Index (SDI) test is used to estimate particulate contamination in water and is a widely accepted method for assessing the potential for colloidal and particulate fouling in water purification systems. It is especially valuable for evaluating pretreatment performance in reverse osmosis (RO) and nanofiltration applications, helping determine the effectiveness of pretreatment processes such as coagulation, filtration and clarification.

The SDI test measures the rate at which a 0.45 µm filter clogs under a constant pressure of 30 psi. Lower SDI values indicate reduced membrane fouling potential. The decrease in flow rate therough the filter is converted into an SDI value between 1 and 100, with higher values signaling inadequate pretreatment or elevated suspended solids, which can result in more frequent membrane cleaning or replacement. An SDI test of less than 3 is generally acceptable for membrane operation without pre-treatment. An SDI of greater than 5 generally indicates the need for additional upstream filtration.

  • Quickly determine the Silt Density Index (SDI)
  • Why test?
  • No instruments required!

Productos vistos recientemente

Cruceta telescópica, GS1440/GS2440EX
Cruceta telescópica, GS1440/GS2440EX

Solicitar más información.

Gracias por ponerse en contacto con nosotros.
Un representante de Hach se pondrá en contacto con usted en 1-2 días laborables.

Condiciones de envío y transporte

Términos y condiciones